Skip to content
ShareMyMeshLoRa mesh

M5Stack

M5Stack Atom + LoRa

The M5Stack Atom + LoRa is a development board LoRa device by M5Stack, based on the ESP32 microcontroller and the SX1276 LoRa transceiver. It transmits at up to 20 dBm with -137 dBm receive sensitivity and draws about 90 mA on average. It is compatible with Meshtastic.

Compatible with:Meshtastic

Specifications

Manufacturer
M5Stack
Type
development board
Microcontroller
ESP32
LoRa transceiver
SX1276
Max TX power
20 dBm
Sensitivity (SF12 BW125)
-137 dBm
Average draw
~90 mA
Is any data on this board wrong or missing? Let us know

Estimated battery life

BatteryAutonomy
2,000 mAh0.9 days
3,000 mAh1.4 days
5,000 mAh2.3 days
10,000 mAh4.6 days
20,000 mAh9.3 days

Theoretical range

Antenna heightRange
1.5 m10.1 km
5 m14.3 km
20 m23.5 km
50 m34.2 km

Line of sight at 915 MHz, stock 2.15 dBi antenna on both ends, receiver at 1.5 m. Range = min(FSPL, radio horizon).

Community builds with the M5Stack Atom + LoRa

No community builds with this board yet — be the first!

Have a M5Stack Atom + LoRa? Share your build

Frequently asked questions

How long does a M5Stack Atom + LoRa last on battery?

At about 90 mA average draw, a M5Stack Atom + LoRa runs roughly 1.4 days on a 3000 mAh 18650 cell and 4.6 days on a 10000 mAh pack. Real-world life depends on transmit duty cycle, screen and Bluetooth use.

What is the range of a M5Stack Atom + LoRa?

With the stock 2.15 dBi antenna at 5 m, the theoretical line-of-sight range is about 14.3 km. In practice terrain and obstacles reduce it; raising the antenna is the single most effective improvement.

Is the M5Stack Atom + LoRa good for a solar node?

It can work, but at ~90 mA average draw it needs a bigger panel and battery than nRF52840-based boards (≈12 mA).